How to Install Hybrid Flooring on Concrete — Step-by-Step Guide.

Concrete is one of the most common subfloor types in Australian homes — especially in apartments, ground-floor slabs, and newer builds. The good news: hybrid flooring is perfectly suited to concrete subfloors. The click-lock floating system means no glue or nails, and the SPC (stone polymer composite) core won't absorb moisture from the slab.

Installation Essentials.

Subfloor Preparation & Requirements

Proper subfloor preparation is the single most important factor in a successful flooring installation. Your subfloor must be clean, structurally sound, level within 3mm over a 1-metre span, and dry (moisture readings below 75% relative humidity for concrete slabs). For concrete subfloors, check for cracks, high spots, and moisture issues — read our subfloor preparation guide for a complete checklist. For timber subfloors, ensure all boards are secure with no squeaking, protruding nails, or excessive bounce. You may need to install a moisture barrier depending on your subfloor type — see our moisture barriers guide guide. Allow a 10mm expansion gap around all walls, door frames, pipes, and fixed objects. This is non-negotiable for floating floor installations and prevents buckling and peaking. For full expansion gap guidance, read our expansion gaps guide.

Tools & Materials Checklist

Before starting your flooring installation, ensure you have all the tools and materials ready. Essential tools include: tape measure and pencil, jigsaw or circular saw with a fine-tooth blade, rubber mallet and tapping block, pull bar for the last row, 10mm spacers, utility knife, straight edge or T-square, and a vacuum or broom. Materials needed: your chosen flooring (order 10% extra for waste — more for herringbone or diagonal layouts), underlay if not built-in (our 9.5mm range includes premium acoustic underlay; our 6.5mm has IXPE underlay built in), moisture barrier if required, scotia or skirting to cover expansion gaps, transition strips for doorways, and silicone sealant for wet area perimeters. See our complete tools checklist and underlay guide for detailed recommendations on every item.

DIY vs Professional Installation

All our hybrid flooring uses a click-lock system specifically designed for DIY installation — no glue, nails, or specialist flooring tools required.That said, some situations benefit from professional installation: complex room layouts with many cuts, stairs and split levels, large open-plan areas where straight lines and consistent gaps are critical, and apartments where body corporate may require certified installation.They handle everything including subfloor preparation, furniture protection, and fitting of all trim profiles. We can provide an installation quote when you order flooring from us. For tips on getting a great DIY result, read our DIY flooring tips and for the full cost breakdown, see our installation costs in Brisbane.

6.5mm Hybrid Flooring

We make things that work better and last longer. Our products solve real problems with clean design and honest materials.

QLD Spotted Gum SPC 6.5mm

QLD Spotted Gum SPC 6.5mm

QLD Spotted Gum SPC 6.5mm

Sale price  $35.00/sqm Regular price  $39.00
Charcoal SPC 6.5mm

Charcoal SPC 6.5mm

Charcoal SPC 6.5mm

Sale price  $35.00/sqm Regular price  $39.00
Pale Sand SPC 6.5mm

Pale Sand SPC 6.5mm

Pale Sand SPC 6.5mm

Sale price  $35.00/sqm Regular price  $39.00
Coastal Blackbutt SPC 6.5mm

Coastal Blackbutt SPC 6.5mm

Coastal Blackbutt SPC 6.5mm

Sale price  $35.00/sqm Regular price  $39.00
Raw Neutral SPC 6.5mm

Raw Neutral SPC 6.5mm

Raw Neutral SPC 6.5mm

Sale price  $35.00/sqm Regular price  $39.00
Ivory Beige SPC 6.5mm

Ivory Beige SPC 6.5mm

Ivory Beige SPC 6.5mm

Sale price  $35.00/sqm Regular price  $39.00
NSW Spotted Gum SPC 6.5mm

NSW Spotted Gum SPC 6.5mm

NSW Spotted Gum SPC 6.5mm

Sale price  $35.00/sqm Regular price  $39.00
Beige Sand SPC 6.5mm

Beige Sand SPC 6.5mm

Beige Sand SPC 6.5mm

Sale price  $35.00/sqm Regular price  $39.00

Professional Installation in Brisbane

Need a professional to handle your flooring installation? Our Brisbane-based installers are fully qualified, insured, and experienced with every product in our range — from 6.5mm SPC hybrid flooring and 9.5mm SPC hybrid flooring to engineered timber flooring. They follow Australian Standard AS/NZ1884-2012 and come equipped to handle subfloor preparation, moisture testing, furniture protection, and all finishing touches including scotia, transition strips, and door trims. Get a bundled supply-and-install quote from us for the most competitive pricing.

Shop Flooring for Your Project

Every flooring product we sell is designed with easy installation in mind. Our 6.5mm SPC hybrid flooring and 9.5mm SPC hybrid flooring hybrid ranges both use precision-engineered click-lock profiles that snap together without adhesive — you literally click the planks into place and the floor floats over your existing subfloor. The 9.5mm SPC hybrid flooring range includes built-in acoustic underlay rated for multi-storey buildings, making it ideal for apartments where sound transmission matters. Our engineered timber flooring also uses a click-lock or tongue-and-groove system depending on the product. All products ship with installation instructions, and we provide free technical support by phone if you get stuck. For a complete comparison of our ranges, read our best hybrid flooring 2026 buyer's guide. Browse the full collection and find the right flooring for your installation project.

6.5mm Hybrid Flooring

We make things that work better and last longer. Our products solve real problems with clean design and honest materials.

QLD Spotted Gum SPC 6.5mm

QLD Spotted Gum SPC 6.5mm

QLD Spotted Gum SPC 6.5mm

Sale price  $35.00/sqm Regular price  $39.00
Charcoal SPC 6.5mm

Charcoal SPC 6.5mm

Charcoal SPC 6.5mm

Sale price  $35.00/sqm Regular price  $39.00
Pale Sand SPC 6.5mm

Pale Sand SPC 6.5mm

Pale Sand SPC 6.5mm

Sale price  $35.00/sqm Regular price  $39.00
Coastal Blackbutt SPC 6.5mm

Coastal Blackbutt SPC 6.5mm

Coastal Blackbutt SPC 6.5mm

Sale price  $35.00/sqm Regular price  $39.00
Raw Neutral SPC 6.5mm

Raw Neutral SPC 6.5mm

Raw Neutral SPC 6.5mm

Sale price  $35.00/sqm Regular price  $39.00
Ivory Beige SPC 6.5mm

Ivory Beige SPC 6.5mm

Ivory Beige SPC 6.5mm

Sale price  $35.00/sqm Regular price  $39.00
NSW Spotted Gum SPC 6.5mm

NSW Spotted Gum SPC 6.5mm

NSW Spotted Gum SPC 6.5mm

Sale price  $35.00/sqm Regular price  $39.00
Beige Sand SPC 6.5mm

Beige Sand SPC 6.5mm

Beige Sand SPC 6.5mm

Sale price  $35.00/sqm Regular price  $39.00

More Installation Resources

We've created comprehensive installation guides for every scenario Australian homeowners face. For subfloor-specific guides: installing on concrete and installing on timber subfloors. For preparation: subfloor preparation guide, moisture barriers guide, and underlay guide. For specific techniques: expansion gaps guide, floating vs glue-down, and DIY flooring tips. For cost planning: installation costs in Brisbane and hybrid flooring costs in 2026. These guides cover everything from moisture testing to cutting around door frames, so you can tackle your installation with confidence. If you're in Brisbane, remember we offer professional installation services alongside our flooring supply — contact us for a bundled quote. If you still need to choose your flooring, browse our full hybrid flooring range to find the right product for your project.

What Our Customers Say.

5.0 out of 5

Installation FAQs.

hello@hippofloors.au
0406 304 357
Brisbane, Queensland
Do I need underlay for hybrid flooring on concrete?

You need both a moisture barrier and underlay on concrete. Our 9.5mm SPC Hybrid range has built-in IXPE underlay, so you only need the moisture barrier. For our 6.5mm range, you'll need to purchase underlay separately. See our underlay guide for recommendations.

How long does concrete need to cure before installing hybrid flooring?

New concrete must cure for a minimum of 30 days, though 60–90 days is ideal. Always test moisture levels with a hygrometer — the slab should read below 75% relative humidity before installation.

Can I install hybrid flooring on concrete in a bathroom?

Yes — hybrid flooring is 100% waterproof, making it suitable for bathrooms. Ensure the concrete is properly waterproofed according to Australian standards (AS 3740) before installation. Use silicone sealant around the perimeter instead of scotia trim in wet areas.

Do I need to glue hybrid flooring to concrete?

No. Hybrid flooring uses a click-lock floating system — no glue, no nails. The floor floats freely over the subfloor, which is why expansion gaps are essential. Gluing is not recommended as it prevents natural movement.

How much hybrid flooring do I need to order?

Measure your room's total square metreage and add 10% for cuts and wastage. For rooms with many angles or obstacles, add 15%. Use our instant quote tool for a fast calculation.

What's Covered by Your Flooring Warranty?

All our flooring comes with a manufacturer's warranty covering defects in workmanship and materials. Our 9.5mm SPC hybrid flooring carries up to a 25-year residential warranty and 5-year commercial warranty. Our 6.5mm SPC hybrid flooring comes with a 20-year residential warranty and 3-year commercial warranty. engineered timber flooring includes warranties specific to each product line. The warranty covers manufacturing faults including peeling, delamination, excessive wear, discolouration not caused by UV exposure, and structural defects in the click-lock system. It does not cover damage from improper installation, neglect, flooding, or accidents. We also comply with Australian Consumer Law, which provides additional statutory protections. For the full warranty terms and how to make a claim, read our warranty guide.

Who Do I Contact If Something Goes Wrong With My Floor?

Contact us directly — you're not dealing with a call centre. You can reach Jordan on 0406 304 357 or email admin@hippofloors.com.au. We respond quickly and personally handle every customer concern. Whether it's a delivery issue, a question about installation, or a potential warranty claim, we'll work with you to resolve it. If a warranty claim is needed, we'll guide you through the process and liaise with the manufacturer on your behalf. For common installation issues like peaking, gapping, or clicking sounds, check our common hybrid flooring problems guide — many issues have simple fixes that don't require a warranty claim.

Are Your Flooring Prices Competitive in Australia?

Yes — and we're transparent about it. As a Brisbane-based online flooring store, our overhead is significantly lower than bricks-and-mortar retailers, and we pass those savings directly to you. Our 6.These are supply-only prices with no hidden markups. We also include direct personal communication with our team — something you won't get from warehouse chains. For a comprehensive pricing breakdown including installation costs, see our hybrid flooring costs in 2026 guide. You can also use our instant quote tool to get an exact price for your project in under 60 seconds. Compare our prices and service — we're confident you won't find better value in Australia.