Accessories
Complete your flooring project with our range of accessories including stair nosings, T-mouldings and scotia. Colour matched to our flooring ranges for a seamless, professional finish throughout your home.
60 products
Natural Blackbutt Scotia
$13.00French Oak Stair Nosing
$50.00Snow Grey Scotia
$13.00Snow Grey T-Moulding
$15.00Snow Grey Stair Nosing
$50.00Pacific Spotted Gum Scotia
$13.00Pacific Spotted Gum T-Moulding
$15.00Pacific Spotted Gum Stair Nosing
$50.00Natural Spotted Gum Scotia
$13.00Natural Spotted Gum T-Moulding
$15.00Natural Spotted Gum Stair Nosing
$50.00Natural Blackbutt T-Moulding
$15.00Natural Blackbutt Stair Nosing
$50.00French Oak Scotia
$13.00French Oak T-Moulding
$15.00QLD Spotted Gum Scotia
$13.00QLD Spotted Gum T-Moulding
$15.00QLD Spotted Gum Stair Nosing
$50.00Pale Sand Scotia
$13.00Pale Sand T-Moulding
$15.00Pale Sand Stair Nosing
$50.00Light Grey Scotia
$13.00Light Grey T-Moulding
$15.00Light Grey Stair Nosing
$50.00Ivory Beige Scotia
$13.00Ivory Beige T-Moulding
$15.00Ivory Beige Stair Nosing
$50.00Coastal Blackbutt Scotia
$13.00Coastal Blackbutt T-Moulding
$15.00Coastal Blackbutt Stair Nosing
$50.00Charcoal Scotia
$13.00Charcoal T-Moulding
$15.00Charcoal Stair Nosing
$50.00Beige Sand Scotia
$13.00Beige Sand T-Moulding
$15.00Beige Sand Stair Nosing
$50.00Snow Grey L-Moulding
$15.00Pacific Spotted Gum L-Moulding
$15.00Natural Spotted Gum L-Moulding
$15.00Natural Blackbutt L-Moulding
$15.00French Oak L-Moulding
$15.00Raw Neutral L-Moulding
$15.00Raw Neutral Reducer
$15.00QLD Spotted Gum L-Moulding
$15.00QLD Spotted Gum Reducer
$15.00Pale Sand L-Moulding
$15.00Pale Sand Reducer
$15.00Light Grey L-Moulding
$15.00Light Grey Reducer
$15.00Ivory Beige L-Moulding
$15.00Ivory Beige Reducer
$15.00Coastal Blackbutt L-Moulding
$15.00Coastal Blackbutt Reducer
$15.00Charcoal L-Moulding
$15.00Charcoal Reducer
$15.00Beige Sand L-Moulding
$15.00Beige Sand Reducer
$15.00
Raw Neutral Scotia
$13.00
Raw Neutral T-Moulding
$15.00
Raw Neutral Stair Nosing
$50.00
Flooring Accessories | Everything for a Complete Install.
The right flooring accessories make the difference between a good installation and a great one. From underlay and moisture barriers to transition strips, scotia, adhesive, and installation tools, our accessories collection has everything you need to finish your floor to a professional standard.
Read more
All our SPC hybrid flooring includes underlay pre-attached to every board, so no separate underlay is needed. You may still need transition strips, scotia mouldings and other finishing products to complete your installation.
For engineered timber and laminate flooring, separate underlay is required and we stock options to suit every subfloor type. Not sure what you need? Contact our team for personalised advice.
What accessories do you need?
Every flooring project needs a few essentials beyond the planks themselves. The right underlay, transitions, and trims ensure your floor performs well, looks professional, and lasts the distance.
Read more
For SPC hybrid flooring (6.5mm and 9.5mm): Underlay is already attached to every board. You just need transition strips where flooring meets other surfaces and scotia to finish wall edges.
For laminate: Separate underlay with integrated moisture barrier, transition strips and scotia.
For engineered timber: Adhesive for glue down installations, or underlay for floating installations, plus transition strips and scotia.
Underlay guide.
Understanding underlay requirements is important for getting the best result from your flooring. Here is what you need to know for each flooring type.
Underlay types
SPC Hybrid Flooring (no separate underlay needed)
All our SPC hybrid boards, both the 6.5mm and 9.5mm ranges, come with IXPE underlay pre-attached. This provides cushioning, sound insulation and a moisture barrier all in one. Do not add additional underlay as too much cushion puts stress on the click lock joints.
Laminate Flooring
Laminate flooring requires separate underlay. Choose standard 2mm foam for most installations or acoustic underlay for apartments and upper level rooms. Over concrete slabs, use a combination underlay with a built in moisture barrier.
Engineered Timber (floating installation)
When floating engineered timber, use a quality underlay suitable for the subfloor type. Over concrete, ensure the underlay includes a moisture barrier. For glue down installations, no underlay is used as the boards are adhered directly to the subfloor.
Complete your install right.
Accessories might not be the exciting part of a flooring project, but they’re what separates a DIY-looking result from a professional finish. The right underlay, transitions, and trims protect your investment and make your floor perform as intended.
Read more
What we stock:
- Underlay for engineered timber and laminate installations (not needed for SPC hybrid as underlay is pre-attached)
- Transition strips including T-bars, reducers and end caps to join flooring between rooms or to different floor heights
- Scotia and quarter round profiles to cover expansion gaps around walls and cabinetry, colour matched to our flooring ranges
- Adhesive for glue down engineered timber installations and fixing transition strips
- Stair nosing profiles for installing flooring on staircases
- Moisture barriers and polyethylene sheeting for concrete subfloor preparation
Not sure what accessories you need for your project? Get in touch and we will put together a list based on your installation.
Accessories buying tips.
Three tips to make sure you order the right accessories for your flooring project.
1. Measure transitions before ordering
Count the number of doorways, room transitions, and exposed edges in your project. Each one needs a transition strip or end cap. Measure the width of each opening to order the correct profile length.
2. Match scotia colours to your floor
Scotia and quarter-round mouldings come in multiple colours to match our flooring ranges. Order samples alongside your flooring samples to ensure a colour match before buying in bulk.
3. Don't forget the moisture barrier
Installing engineered timber or laminate over concrete? Make sure your underlay includes a moisture barrier, or lay a separate polyethylene sheet. This prevents slab moisture reaching your floor core and causing damage over time. Note that our SPC hybrid flooring already has a moisture barrier built into the attached underlay.
Your Questions About Flooring Accessories.
Common questions about flooring accessories including transition strips, scotia, adhesive and installation essentials. Contact us if you need personalised advice.
Does your hybrid flooring come with underlay?
Yes. Every SPC hybrid board in our range comes with IXPE underlay already attached to the back of the plank. Our 6.5mm hybrid flooring has 1.5mm IXPE underlay attached and our 9.5mm hybrid flooring has 2mm IXPE underlay attached.
You do not need to buy or install separate underlay. In fact, we recommend that you do not add a second layer of underlay as this can make the floor feel spongy and interfere with the click lock joints over time.
What transition strips do I need?
The type depends on where your flooring meets other surfaces:
- T-bar: where two floating floors of the same height meet (e.g., between rooms)
- Reducer: where your floating floor meets a lower surface (e.g., tiles)
- End cap: where your floor ends at a doorway or step
We stock profiles in multiple colours to match our hybrid and engineered timber ranges.
Can I install hybrid flooring without scotia?
Scotia (or quarter-round moulding) covers the required 10mm expansion gap between the floor and the wall. While some installations use skirting boards instead, scotia is the easiest and most common solution — especially during renovations where you don’t want to remove existing skirting.
What adhesive do I need for engineered timber?
For glue down engineered timber installations, use a flexible polyurethane flooring adhesive. This allows for minor timber movement while maintaining a secure bond. We stock adhesive suitable for both concrete and plywood subfloors.
For floating installations with click lock boards, no adhesive is needed. Simply click the boards together over a flat surface.
Do I need a moisture barrier over concrete?
For engineered timber floating installations and laminate flooring over concrete slabs, a polyethylene moisture barrier is recommended. It prevents moisture wicking up from the slab and reaching the floor core material.
For our SPC hybrid flooring, the attached IXPE underlay already includes a moisture barrier so no additional barrier is required.
What tools do I need for click-lock flooring?
Basic tools for installing click-lock hybrid or laminate flooring:
- Tape measure
- Pencil
- Spacers (10mm for expansion gaps)
- Rubber mallet (or tapping block)
- Pull bar (for the last row against walls)
- Saw (drop saw, jigsaw, or circular saw for cuts)
No glue, no nails, no specialised equipment needed. Most homeowners already have these tools.
How much extra material should I order?
We recommend ordering 8–10% extra for standard straight-lay installations to account for cuts, waste, and any planks with minor defects. For herringbone patterns, order 15–20% extra due to the additional cuts required by the zig-zag layout.
Rooms with lots of angles, doorways, or alcoves should go closer to the higher end of these ranges.
Can I return unused accessories?
Yes — unused, unopened accessories can be returned within our standard return period. Contact our team to arrange a return. We recommend measuring carefully and ordering with a small buffer so you have everything you need without significant surplus.